Wednesday, April 3, 2013
Renault mascot W21-760-3125 installation instructions
1. to cut the tubing set correctly to a suitable cutter must be used (not scissors)
2. Insert the hose in the connection it must be pushed in around 14 mm, until hearing a click.
3. to remove tube, slide on flange connection, and at the same time pull the tube. (No tools necessary).
4. Attention when a tube is removed, it is important to trim 14 mm from the end before reconnection.
5. it is advisable that LOCKTITE is used on threaded fittings.
Important
• The installation manual should be read completely before you begin Assembly.
• This kit no G.V.W. increases (gross vehicle weight) of your vehicle for your safety and to avoid any damage to your vehicle does not exceed the manufacturer's maximum recommended load.
• Do not inflate airbags before Assembly.
• When the kit is installed does not exceed the max and min pressure limits, improper use or over inflation may cause deterioration of your suspension.
Download
Labels:
Renault